Accura Engineering & Consulting Services, Inc.

Inspect utility installation on interstate projects, ensure compliance with plans and specifications, and document progress. | High school diploma or higher, 3+ years in utilities inspection, familiarity with GDOT standards, valid driver’s license, physical ability to work on construction sites. | Job Title: CEI Inspector - Utilities​ • **Work Location: Atlanta, GA *** Salary: Based on experience and will be discussed with manager in interview Duties/Responsibilities: • Ability to read and interpret roadway and structure plans, contract specifications, schedules and quantities • Monitor the contractor’s on-site construction activities and performing inspections to ensure conformance to project plans and specifications and document process • Prepare daily field reports • Ensure quality assurance is met for project • Meets scheduling and attendance requirements • Understands and interprets schematic drawings • Work on interstate widening project that requires utility monitoring • Inspect installation of all utilities on the project Education/Experience: • High School Diploma or bachelor’s degree in Engineering, Construction Management or related discipline. • 3+ years of related work experience in utilities inspection as a part of an interstate improvement project. • Experienced in GDOT manuals, specifications and protocols • Familiar with traffic control plans including but not limited to traffic shifts, detours, lane closures or other activities that disrupt traffic flow • Knowledge of the properties, characteristics, strengths, and weaknesses of the materials used in construction • Must have a valid driver’s license and be insurable • Familiar with GDOT Utility Coordination procedures during construction Physical Requirements: • Physically mobile in and around construction sites and field assignments • Ability to carry required instruments and equipment • Ability to lift 50 pounds • Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. • The worker is subject to variable climate and environmental conditions including but not limited to extreme cold and heat. Benefits: • Competitive salary based on experience. • Comprehensive health, dental, and vision insurance. • Retirement savings plan with company match. • Paid time off and holidays. • Professional development and career advancement opportunities. • A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. www.dhs.gov/everify

Monitor construction activities, ensure quality standards, interpret plans, and inspect utility installations on interstate projects. | High school diploma, 3+ years utility inspection experience, knowledge of GDOT protocols, valid driver’s license, physical ability to perform site duties. | Job Title: CEI Inspector - Utilities​ • **Work Location: Atlanta, GA *** Salary: Based on experience and will be discussed with manager in interview Duties/Responsibilities: • Ability to read and interpret roadway and structure plans, contract specifications, schedules and quantities • Monitor the contractor’s on-site construction activities and performing inspections to ensure conformance to project plans and specifications and document process • Prepare daily field reports • Ensure quality assurance is met for project • Meets scheduling and attendance requirements • Understands and interprets schematic drawings • Work on interstate widening project that requires utility monitoring • Inspect installation of all utilities on the project Education/Experience: • High School Diploma or bachelor’s degree in Engineering, Construction Management or related discipline. • 3+ years of related work experience in utilities inspection as a part of an interstate improvement project. • Experienced in GDOT manuals, specifications and protocols • Familiar with traffic control plans including but not limited to traffic shifts, detours, lane closures or other activities that disrupt traffic flow • Knowledge of the properties, characteristics, strengths, and weaknesses of the materials used in construction • Must have a valid driver’s license and be insurable • Familiar with GDOT Utility Coordination procedures during construction Physical Requirements: • Physically mobile in and around construction sites and field assignments • Ability to carry required instruments and equipment • Ability to lift 50 pounds • Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. • The worker is subject to variable climate and environmental conditions including but not limited to extreme cold and heat. Benefits: • Competitive salary based on experience. • Comprehensive health, dental, and vision insurance. • Retirement savings plan with company match. • Paid time off and holidays. • Professional development and career advancement opportunities. • A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. www.dhs.gov/everify

Manage airport construction projects, coordinate stakeholders, ensure compliance, and oversee project completion. | Requires a Bachelor's in Engineering, PE license, 10-15 years of aviation-related project management experience, and familiarity with FAA standards. | Senior Project Manager - Aviation • **Work Location: Nashville, TN *** Salary: Based on experience and will be discussed with manager in interview Accura Engineering is looking for a Senior Project Manager to join our Aviation program in Nashville, TN. The primary duties will include planning, directing, and monitoring all aspects of multi-discipline airport projects with high degrees of technical complexity and involving managing project staff. Duties/Responsibilities: • Leads the successful development and implementation of multiple, concurrent airside and landslide Capital Projects at international airport facility as part of the construction and program management team. • Work with consultants, airport staff, and stakeholders to ensure project goals are met for each assigned project. • Will be responsible for managing staffing and workload through project development completing project on time and within budget • Review plans, develop cost estimates and projections for assigned projects, schedule and conduct design progress meetings, prepare records required for Federal or state reimbursement. • Ensure that construction contracts are in compliance with applicable federal and state equal opportunity legislation. • Coordinate activities with outside agencies to assure timely completion of all projects, compile • and analyze technical data, prepare reports concerning project related activities. • Will oversee Quality Assurance Review and be responsible for implementing QA/QC procedures, and for the execution of training for personnel. • Monitor safety compliance and contractor safety oversight • Oversee project closeout administration. • Will typically supervise project staff and act as a mentor for less experienced staff members. Education/Experience: • Bachelor's degree in Engineering • PE license is required • PMP certification is preferred • Minimum 10-15 years of aviation-related engineering or construction management experience. This must include planning services related to airport master planning and project management experience. • A minimum 5 years aviation design project management experience • Experience in designing and managing aviation projects and developing plans, specifications, and estimate for airport agencies and private clients • Experience with FAA design standards, procedures, and policies • AutoCAD, Civil 3D, MicroStation [HC1], MS Office and MS Project experience is preferred. • Demonstrated business development and strategic planning skills are desired. • Good communication, leadership, planning, and mentoring skills are a must. • Knowledge of aviation market in Nashville including client relationships and past project experience preferred. • A commitment to being an active participant of our employee-owned culture is a must. • Preference given to local candidates. Benefits: • Competitive salary based on experience. • Comprehensive health, dental, and vision insurance. • Retirement savings plan with company match. • Paid time off and holidays. • Professional development and career advancement opportunities. • A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. www.dhs.gov/everify

Perform detailed inspections and reporting on large federal construction projects ensuring compliance with schedules, safety, and contract specifications. | High school diploma or GED with 5+ years experience on large federal construction projects, knowledge of RMS, OSHA, and contract management processes. | QA Inspector • **Work Location: Grand Forks, ND ( Grand Forks AFB)*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: • Observes and investigates construction phases for compliance with schedules, specifications, and shop drawings. Identifies problems, recommends changes, and assesses the need for contract modifications. • Performs inspections and completes daily site reports in RMS. Include comments and monitoring of progress, work activities, safety issues and subcontractor manpower in the reports. • Assists in all phases of the contract modification process. Assists in preparation of scopes of work for RFP's, assists in preparation of government estimates, assists with reviews of contractor's proposals, and assists with preparation of contract modification documentation. • Reviews and analyzes contractor plans and technical submittals for approval action, including progress schedules, environmental, safety and quality control programs, certifications and shop drawings. • Prepares correspondence regarding Contractor performance, Requests for Equitable Adjustments (REAs), Requests for Information (RFIs) and other technical issues. • Prepares both partial and final payment estimates including the measurement and computation of pay item quantities, verification of materials on hand, and percentage complete of lump sum items. • Monitors scheduled progress of all construction activities and phases of construction and advises the Resident Engineer, COR, and project team of potential slippage or delay • Participates and executes RFI and Submittal reviews, including coordination with the designers, RE, and technical experts and executes responses to the contractor. • Logs and maintains data as necessary to assist with project management and decision making. • Performs other duties as assigned Education/Experience: • High School Diploma/GED minimum; Construction related degree, preferred • Minimum of 5 years of applicable experience on construction projects large complex multimillion dollar federal projects, Department of Defense or USACE preferred • Experience using RMS 3.0, preferred • Experience with three-phase inspection process • Experience with OSHA and EM 385-1-1 USACE Safety Manual, preferred Benefits: • Competitive salary based on experience. • Comprehensive health, dental, and vision insurance. • Retirement savings plan with company match. • Paid time off and holidays. • Professional development and career advancement opportunities. • A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. www.dhs.gov/everify

Inspect and report on construction projects, perform welding, coating, and bolting inspections, and ensure compliance with specifications. | High school diploma with 5+ years in construction inspection, AWS welding certification, NACE or SSPC coating inspection certification, and experience with structural bolting and NDT. | Job Title: Construction Inspector- Welding/Coating • **Work Location: Gibsonton, FL*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities • Observe, inspect, and provide reports on construction projects at federal facilities for compliance with plans and specifications in regard to workmanship, materials, installation, and construction methods. • Perform construction welding inspections relating to steel fabrication. • Services will required fabrication shop practices including storage, handling, cutting, bending, machining, fit-up, surface prep, welding, bolting, erection and coatings. • Perform coating inspections and testing of various coating systems and methods of application. • Perform structural bolting inspections and testing of various bolting methods and installation. • Provide recommendations or necessary changes to government personnel regarding contract plans and specification relative to all phases of construction. • Monitor contractor’s quality system and administer the three-phase inspection process. • Provide surveillance at construction sites and assists owner in problem resolution. • Deliver and review change orders; modification; RFIs; and submittals. • Monitor contractor’s schedule. • Review and ensure QA and safety plans are adhered to by the contractor. • Utilize Resident Management System (RMS). Education/Experience: • High School graduate with 5 years of experience with construction welding inspections and 2 years of experience in coating inspections and structural bolting inspections. • AWS Certified Welding Inspector in conformance with AWS QC1 and shall have a minimum of five (5) years of experience relating to steel fabrication. • Nondestructive testing (NDT) personnel shall be qualified to ASNT. • Coating inspection and must have NACE Level I or higher or SSPC Protective Coatings Inspector Level 1 or higher and shall have received formal training in coating inspections and testing of various coating systems and methods of application. The individual shall have a minimum of two (2) years of experience in inspection and testing of coating systems. • Structural Bolting Inspection experience and must be certified in accordance with AASHTO G4.2 guidelines and have received formal training in structural bolting inspections and testing of various bolting methods and installation is preferred. • Experience with Three-Phase QC/Inspection process • Experience preferred EM 385-1-1 USACE Safety Manual • Experience preferred with Resident Management System (RMS) Benefits: • Competitive salary based on experience. • Comprehensive health, dental, and vision insurance. • Retirement savings plan with company match. • Paid time off and holidays. • Professional development and career advancement opportunities. • A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. www.dhs.gov/everify

Provides construction management services, inspections, and quality assurance at an airport construction site. | High school diploma or GED with extensive construction inspection experience, or relevant technical/trade training with years of experience, plus certifications. | Construction Inspector- Aviation • **Work Location: Nashville, TN *** Salary: Based on experience and will be discussed with manager in interview Duties/Responsibilities: • Provides construction management services on multiple or complex projects at an international airport facility. • Provides on-going construction inspection, quality assurance and performs specialty inspections. • Reviews contractor’s work inspects delivered materials and verifies certifications. • Ensures compliance with approved construction documents, specifications and contract requirements. • Records daily observations and reports noncompliance. • Coordinates and verifies field testing of materials • Review and approves pay applications. • Reviews contractor’s quality control and safety manuals and procedures. • Performs daily safety inspections. • Reviews construction plans and specifications. • Reviews contractor submittals for constructability and compliance. This position requires heavy lifting, working outside in a variety of conditions on a regular basis, and ability to perform work independently. Travel to construction sites is an essential function of this position; a valid driver’s license is required. Extended hours and overnight stays may be required. Education/Experience: • High school diploma is required or GED with a minimum of 8 years of construction inspection experience • Alternatively, an Associate degree (two- year degree)/Technical Training degree (two years of training) in construction management, engineering, or related field, along with 6 years’ experience in construction inspection. • Or, a Bachelor’s degree in Construction Management, Civil Engineering, or related field, plus 4 years of relevant experience • 8+ years of experience in construction inspection construction materials testing and/or observation in the transportation field • State certifications in Materials Testing preferred, along with safety certifications • Experience with airport construction projects Benefits: • Competitive salary based on experience. • Comprehensive health, dental, and vision insurance. • Retirement savings plan with company match. • Paid time off and holidays. • Professional development and career advancement opportunities. • A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. www.dhs.gov/everify

Manage operations and maintenance activities for transportation projects ensuring compliance with GDOT standards, lead a team, oversee budgets, and coordinate with stakeholders. | Bachelor's degree in Civil Engineering or related field, 10+ years experience in operations and maintenance management in transportation, knowledge of GDOT projects and regulations, leadership and financial management skills. | Job Title: Operations & Maintenance Manager • **Work Location: Atlanta, GA *** Salary: Based on experience and will be discussed with manager in interview Duties/Responsibilities: • Assists the OV Construction Manager to administer the technical tracking and documentation throughout the duration of the D&C Period and closeout of the Project. • Tracks and verifies compliance with reviews and responses to Construction Documentation (Field Changes, Design Changes, etc.). • Oversee and manage the operations and maintenance activities related to transportation projects, ensuring alignment with GDOT standards and procedures. • Develop and implement strategic plans for efficient and cost-effective operations and maintenance practices. • Lead and mentor a team of operations and maintenance professionals, fostering a culture of excellence, collaboration, and continuous improvement. • Provide guidance and support to ensure the team's effectiveness in meeting project goals. • Implement and manage asset management strategies for transportation infrastructure, including monitoring the condition and performance of assets, and recommending maintenance or replacement as needed. • Take responsibility for the budget planning and financial management of operations and maintenance activities, ensuring optimal resource allocation and cost-effectiveness. • Collaborate with internal and external stakeholders, including GDOT officials, contractors, and regulatory agencies, to ensure smooth coordination of operations and maintenance activities. • Assist the OV Construction Manager in administering technical tracking and documentation throughout the duration of the Design & Construction (D&C) Period and project closeout. • Develop and implement systems to monitor and evaluate the performance of operations and maintenance activities, ensuring adherence to GDOT standards and regulatory requirements. • Proactively identify areas for improvement in operations and maintenance processes and implement best practices to enhance efficiency and effectiveness. Education/Experience: • Bachelor’s degree in Civil Engineering, Transportation Management, or a related field • Advanced degrees or professional certifications are beneficial. • A minimum of 10 years of experience in operations and maintenance management, with a proven track record of successful leadership in transportation projects. • Experience with GDOT projects and procedures is strongly preferred. • In-depth knowledge of GDOT projects, procedures, and regulatory requirements. • Strong technical understanding of asset management principles and operations and maintenance practices. • Demonstrated leadership and management skills, with the ability to lead and inspire a diverse team. • Strong financial management skills, with the ability to develop and manage budgets effectively. • Excellent communication and interpersonal skills, with the ability to effectively liaise with stakeholders at various levels. Benefits: • Competitive salary based on experience. • Comprehensive health, dental, and vision insurance. • Retirement savings plan with company match. • Paid time off and holidays. • Professional development and career advancement opportunities. • A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. www.dhs.gov/everify

The role involves inspecting and ensuring quality and safety of mechanical systems in construction projects, reviewing contractor work, and verifying compliance with standards. | Requires a high school diploma or GED, with at least 5 years of construction inspection experience focused on HVAC and mechanical systems, and familiarity with building codes and safety regulations. | Construction Inspector- Mechanical • **Work Location: Nashville, TN *** Salary: Based on experience and will be discussed with manager in interview Duties/Responsibilities: • Provides construction inspection and quality assurance services on multiple or complex mechanical systems projects at an international airport facility. • Conducts on-site inspections of HVAC, plumbing, and mechanical systems to ensure compliance with approved construction documents, specifications, and contract requirements. • Reviews contractor’s work, inspects delivered materials, and verifies certifications. • Ensures compliance with approved construction documents, specifications and contract requirements. • Records daily observations and reports any noncompliance issues. • Coordinates and verifies field testing of mechanical systems and materials. • Reviews and approves pay applications related to mechanical work. • Reviews contractor’s quality control and safety manuals and procedures. • Ensures contractor adherence to safety standards and conducts daily safety inspections. • Reviews contractor submittals for constructability and compliance with project specifications. • Provides technical guidance on mechanical system installations, including HVAC, piping, and equipment. • Monitors contractor performance and compliance with mechanical system standards and building codes. • Reviews contractor submittals for constructability and compliance. Education/Experience: • High school diploma is required or GED • Associate degree in Mechanical Engineering, Construction Management, or a related field preferred. • Minimum of 5 years of construction inspection experience, focused on HVAC and mechanical systems • Experience with mechanical systems, including HVAC, plumbing, and equipment installations. • Familiarity with building codes, safety regulations, and mechanical system testing procedures. • Certifications in mechanical or HVAC systems preferred. • Experience with airport construction projects preferred • Familiarity with building codes, safety regulations, and mechanical system testing procedures. Benefits: • Competitive salary based on experience. • Comprehensive health, dental, and vision insurance. • Retirement savings plan with company match. • Paid time off and holidays. • Professional development and career advancement opportunities. • A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. www.dhs.gov/everify

Manage multiple concurrent aviation capital projects from design through construction, ensuring compliance with FAA standards and coordinating with regulatory agencies and contractors. | Bachelor's degree in Engineering, PE license, 8-10 years aviation engineering experience, knowledge of FAA funding and guidelines, and project management skills. | Project Manager - Aviation • **Work Location: Nashville, TN *** Salary: Based on experience and will be discussed with manager in interview Duties/Responsibilities: • Manages the implementation of multiple, concurrent airside and landslide Capital Projects at international airport facility as part of the construction and program management team. • Provides direction and input on projects from design development stage through construction. • Acts as primary representative on projects, establishes standards for meeting minutes, records, etc. and ensures Designers and Contractors are meeting quality standards. • Facilitates coordination with other airport divisions and local and federal regulatory agencies, as appropriate. • Coordinate with various utility companies and public/private agencies having jurisdiction, including FAA, TSA, telephone companies, and other Federal, State, and local agencies. • Familiar with a variety of projects as well as project delivery methods (i.e. design-bid-build, design-build, and construction manager at risk). • Provide quality control for administration procedures, design, and construction processes. • Manage requests for information and clarification, submittals, samples, and shop drawings. • Prepare comprehensive Project Management Plans and tracks project budgets, contracts, billing, and schedules. • Ensures Quality Program implementation and execution. • Reviews project reports and findings, making modifications to project, as needed. • Acts as primary agent between client and project team developing the project scope and proposals, coordinating events, leading client meetings and internal project meetings, and delivery of final project to client. • Monitor safety compliance and contractor safety oversight. • Conduct project closeout administration. • Develops and maintains positive relationships with clients, customers, officials, contractors, and others. • Sets an example of our core values in daily actions and promotes a positive workplace culture. Education/Experience: • Bachelor's degree in Engineering or related field required • PE license is required • 8-10 years of experience including aviation engineering experience • Project Management Professional (PMP) certification, a plus • Knowledge in FAA funding, FAA guidelines, including pavement design Advisory Circulars, pavement design software, current construction specifications, and airport construction safety plans. • Must have experience designing and managing aviation projects and developing plans, specifications, and estimates for airport agencies. • Superior knowledge of FAA Airport Circulars and engineering design, bidding, construction administration, and management of airport projects • Must be a collaborative team player • Excellent communication skills, verbal, and written Benefits: • Competitive salary based on experience. • Comprehensive health, dental, and vision insurance. • Retirement savings plan with company match. • Paid time off and holidays. • Professional development and career advancement opportunities. • A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. www.dhs.gov/everify